What are the basic principles of computer case design?
I want to have a go at building a new computer case for my ATX form factor computer. it's a custom built computer currently in a tower case i want to change it. The main reason is to make it quieter but how can i do this without compromising the heat dissipation? i have a 150mm (thats how far apart the screws are set in opposite corners) fan on the back and a big heat sink and fan on the Pentium 4 Prescott processor.
What materials should i avoid and do you have any recommendations for possible alternative materials. Preferably i would like to make it really interesting, if you have any reference pictures of other mods people have done that would be cool.
Has anyone have any harsh lessons from experience of what i should avoid doing?
Also from what i can tell the main cause of the noise coming from my case is the rush of air, the actual case itself has very little vibration apart from when i put a CD or DVD in the drive.
Thank you in advance for any! help.
I can help regarding the Thermal aspects of the case design (having done this a few times before proffesionally).
Everyone knows that to keep computer components cool you need 2 elements:
1. Heatsinks (to disapate the heat *increase is surface area*)
2. A "liquid" way of removing that disapated heat outside the case (air/water/oil)
Many people have started to experiment with water and oil, but i personally dont trust it, and would stick with air cooling.
Lets start with heat sinks: These can be made of many different materials, but the main two are Aluminium and Copper. Copper is better at disapating heat, due to its properties as a metal. Hence silver and gold are also good fr this, but a little expensive. If you want to disapate heat more efficiently, then use copper heat sinks.
Now yes, you get all these great big heatsinks (like the zalmans etc...) which look really cool, but they take up to much space for a form factor (and they are too noisey) You are better off using a retangular heatsink (remember the more fins there are, and the thinner the fins are, the better the heatsink is at its job. Also the method of creating the fins is also important.
A bonded fin (one which is welded to the base) is not so good. Extruded fins are a bit better. But skiving fins are the best (essentially these are cut into the block of metal, so its properties are least affected). Try looking at www.dynatron-corp.com for some good examples.
So, now you have heatsinks on your components, you need to decide if you want to have lots of little high speed fans or blowers sitting on each one, or whether you leave the little fans off, and go for "passive" component cooling. Now thi is normally only advised if you can cool air, then blow it through the case at high speed, and suck it out the other side. but thats noisey and expensive. So i would go for active cooling (but make sure you get low-speed, low noise fans (the bearing used is important but i wont go into bearings today)
NOTE: it is not about how fats the fans spin, it is about how much air they move per second (CFM) A big fan that spins slowly will move more air persecond than a small fan spinning fast.
So get the biggest fans you can.
The more air you move through the case, the better, so make sure you have one sucking air in, and one blowing air out (set them to run at the same speed.) If you have 2 x 12cm fans spinning at less than 1000rpm, then you will hardly even hear the noise they make.
NOTE ON DUST: fans work because the blade cut through the air, and scope it/move it in a direction. If the fan blades are dusty, they will not cut air aswell, and you can decrease the performance by over 50%!!!! Keep your fans clean. Use filters only where absolutely needed.
So, case design... begin by having all your components laid out on a surface (include a PCI graphics card riser) this means you can change the orientation of your graphics card if you need to. Rotates the card port by 90degrees, very handy in a form factor.
Your Motherboard is your basic foot print, so try and fit everything into a case that is the same size as that (and only 12cm wide!!!) Try it, and if you need more space, just do it little by little. 3D modelling is an advantage here. By the way, 12cm is chosen because it is the size of the fans i recommended.
It can be done, i have built a high performance games machine to 240mm x 150mm x 50mm in the past, and had it on near silent running.
As far as material goes, i have only ever used perspex and aluminium.
Good luck.
Message me if you want some other ideas, i can send you some pics of my work.
)
J2G
 |
 10 WOMENS DESIGNER ITEMS COMPACT MIRRORS PLANNERS MAKE UP CASES BRASS $2.81 (2 Bids) Time Remaining: 20h 43m |
 15 Piece Crown Brush Set w Designer Case $75.00 Time Remaining: 1d 7h 43m Buy It Now for only: $75.00 |
 Kanebo Coffret Dor Beauty Sharp Designer With Case L 02 105g Makeup $58.15 Time Remaining: 2d 6h 35m Buy It Now for only: $58.15 |
 Makeup Mirror with Asian design fabric case and handle made in Hong Kong $10.99 Time Remaining: 2d 10h 10m |
 ESTEE LAUDER MAKEUP MIRRORED COMPACT CASE METAL WITH FACE DESIGN ON TOP $0.99 Time Remaining: 4d 9h 33m |
 Kanebo Coffret Dor Beauty Sharp Designer With Case L 03 105g Makeup $58.15 Time Remaining: 4d 16h 50m Buy It Now for only: $58.15 |
 2x Cute Cartoon Toothbrush Holder Clipper Hold Box Case Pouch Suction Cup Design $1.74 Time Remaining: 6d 16h 25m Buy It Now for only: $1.74 |
 32 pcs Designer Professional Makeup Cosmetic Brush set case Free Gift too $19.99 Time Remaining: 6d 20h 22m Buy It Now for only: $29.99 |
 Panda Design Mirrored Single Lipstick Case $2.95 Time Remaining: 7d 5h 39m Buy It Now for only: $2.95 |
 Folding Round Case Design Chrysanthemum Make up Mirror $5.97 Time Remaining: 14d 23h 1m Buy It Now for only: $5.97 |
 Folding Round Case Design Chrysanthemum Make up Mirror $5.35 Time Remaining: 18d 2h 28m Buy It Now for only: $5.35 |
 Designer Cosmetic Makeup Brush Set 15 piece with Black Reptile Case $37.95 Time Remaining: 22d 1h 22m Buy It Now for only: $37.95 |
 Mother of Pearl Peacock Design Business Card Case Compact Makeup Mirror Gift Set $36.90 Time Remaining: 22d 11h 22m Buy It Now for only: $36.90 |
 Lot of 12 x Panda Design Silk Brocade Lipstick Cases $19.99 Time Remaining: 26d 23h 36m Buy It Now for only: $19.99 |
| Account limit of 2000 requests per hour exceeded. |
